WE ARE THE FIRST IN UKRAINE WHO MANUFACTURES AND SELLS POLYMER PLATES (OVERLAYS) FOR ENTRANCE DOORS
POLYMERIC overlays on entrance metal doors for replacement of the inflated, damaged MDF panels.
The fundamentally new composite polymer material is ideal for outdoor use.
DOES NOT get wet, does not swell, is not afraid of rain, frost, sun!
To cooperate, call the number: +38 (098) 429-34-69
Unlike MDF, no film is used. MDF is made by pressing wood chips, so it requires the application of a protective film. It often happens that under the influence of external factors (temperature changes, condensation, rain, hollow, snow, direct sunlight, etc.) the outer film does not withstand and blows, cracks, moves away from the MDF lining, the wood-fiber board itself swells, absorbs moisture, deforms and can no longer perform its functions of heat and noise insulation, the appearance suffers. If you have such a problem with your Door - this is an offer for YOU.
Why buy new MDF doors (and wait to see if something happens again), if you can replace the MDF cover with durable polymer? ;)
POLYMER panel does not support combustion, has the best noise and heat-insulating properties, does not concede to appearance.
We can reproduce the most approximate color, texture, pattern of your door. This is convenient when only one side (internal or external) needs to be replaced, which will save significantly. To replace the panels do not need to dismantle and take the door to the workshop, a specialist on site performs this work.
Why buy new MDF doors (and wait to see if something happens again), if you can replace the MDF cover with durable polymer? ;)
POLYMER panel does not support combustion, has the best noise and heat-insulating properties, does not concede to appearance.
We can reproduce the most approximate color, texture, pattern of your door. This is convenient when only one side (internal or external) needs to be replaced, which will save significantly. To replace the panels do not need to dismantle and take the door to the workshop, a specialist on site performs this work.
Color options of polymer overlays
Characteristics of polymer overlays:
1) The amount of formaldehyde release, the amount of volatile benzene is 0.1 mg / l, which is much less than the requirements of the international standard E0 is less than 0.5 mg / l.
2) Capable of biodegradability, does not pollute the environment. Can be recycled.
3) The moisture content is only 0.04%, the water absorption coefficient of 0.1%, does not deform and does not mold. Can be used directly in the aquatic environment.
4) Refractory properties are classified by GB8624 B1 (flame retardant).
5) Resistance to high temperatures. The size of high and low temperature and rate of change is only +/- 0.1%. External products prevent deformation in high temperatures at +75 ° C.
6) Low thermal conductivity.
7) High mechanical characteristics.
8) High color fastness. Does not fade, does not change color, external protection against ultraviolet rays, is not afraid of sunlight, color and shine is strong.
9) Anti-aging, acid and alkaline resistance, corrosion resistance, easy to clean, does not crack, does not deform, no dew, resistant to insects.
2) Capable of biodegradability, does not pollute the environment. Can be recycled.
3) The moisture content is only 0.04%, the water absorption coefficient of 0.1%, does not deform and does not mold. Can be used directly in the aquatic environment.
4) Refractory properties are classified by GB8624 B1 (flame retardant).
5) Resistance to high temperatures. The size of high and low temperature and rate of change is only +/- 0.1%. External products prevent deformation in high temperatures at +75 ° C.
6) Low thermal conductivity.
7) High mechanical characteristics.
8) High color fastness. Does not fade, does not change color, external protection against ultraviolet rays, is not afraid of sunlight, color and shine is strong.
9) Anti-aging, acid and alkaline resistance, corrosion resistance, easy to clean, does not crack, does not deform, no dew, resistant to insects.
Doors with overlays from polymeric plates
